Equipment, Sands & Coatings

Equipment, Sands & Coatings

 

Production Equipment
Equipment Capabilities L” x W” – Orientation
B&P CB-50 600 lb. Cores 35″ x 49″ Horizontally-parted tooling
B&P CB-18 200 lb. Cores 26″ x 30″ Table; Horizontal – Blow
B&P CB-184 200 lb. Cores 28″ x 28″ Horizontal
George Fischer 3050 120 lb. Cores 33.25″ x 49.75″ Horizontal
Shalco 321 450 lb. Cores 29″ x 29″ Vertical Tooling
Redford Vertical 22 100 lb. Cores 20″ x 21″ Platens
Redford Horizontal 22 120 lb. Cores 19.5″ x 19.5″ Platens
Redford Convertible 22 80 lb. Cores Vertical or Horizontal Blow
Redford Vertical 16 35 lb. Cores 16″ x 20″ Platens
Gaylord 50 lb. Cores Vertical or Horizontal Split
Hand Bench Up to 10 lbs. blow, 30lbs. hand-ram Smaller Dump boxes
Air Set Line up to 2,000lbs Cores and Molds
Available Sands
Grit Type of Sand
55 AFS Lake Sand
55 AFS Round Grain Silica
70 AFS Round Grain Silica
70 AFS Olivine Sand
Chromite
Florida Zircon
On request Others Available
Resin Binder: Lower in VOC’s and odor
Cold Box – HA International – Biocure Phenolic Urethane Biodiesel Base
Airset – HA International – Techniset Phenolic – Urethane Biodiesel Base
Available Coatings
Core Coating
Graphite Wash
Zircon Wash
Others water-based washes on request
Coating are water-based washes supplied by Refcotec, HA International, ASK
Powder Additives
Vein Seal 3% (Standard) 10% (Max)
Sphere-Ox No Coat
Sphere-Ox (Black Iron Oxide) @ various levels (Standard 2%)