UNItube Preparation and Installation Guide

UNItube Preparation and Installation Guide

 

Corebox funnel Specs:

“T” – Distance from back of corebox cover to cavity

“Y” – Allows for no protrusion, protrusion must be added to “Y” if desired*

*If protrusion is added to “Y” – Funnel DIA. “D” will increase by approximately One-half the amount added.  

Tube Size " X " " X " " D " " D " Max. " T " Min. ” T “
Metric English Metric English Metric English Metric English Metric English
4.5 .177 52.57 2.070 9.06 .357 141.6 5.57 39.5 1.56
6 .236 49.58 1.952 10.69 .421 138.5 5.45 36.5 1.44
9 .354 43.58 1.716 13.89 .547 132.7 5.22 30.6 1.20
12 .472 37.56 1.479 17.11 .674 126.6 4.98 24.3 .96
15 .591 31.57 1.243 20.32 .800 120.5 4.74 18.4 .72
18 .709 25.57 1.007 23.54 .927 114.4 4.50 12.3 .48
20 .787 19.58 .771 27.77 1.054 108.5 4.27 6.5 .26

UNItube Specifications

Applications:
Cold box core making process
Oil-sand applications

Material:
Thermoplastic Elastomer

Diameter:
Adjustable from 4.5-20mm
(.18"- .79")

Length:
Adjustable

Blow Plate requirement:
One 30-2mm tapped hole per
UNItube